Elektra Beckum BAS 500 WNB User Manual

115 168 8051 / 3602 - 1.0 de, en
Achtung! Lesen Sie diese Anleitung vor der Installation und Inbetriebnahme aufmerksam durch.
Attention! Carefully read through these instructions prior to installation and commissioning.
D
ENG
D
ENG
Betriebsanleitung Bandsäge
Operating Instructions for Band Saw
BAS 500 WNB

Elektra Beckum BAS 500 WNB Specifications

General

Brand	Elektra Beckum
Model	BAS 500 WNB
Category	Saw
Language	English

Summary

Declaration of Conformity

General Safety Information

Disclaimer

General

Specifications

Machine Installation

Table Side Alignment

Aligning the saw table for proper blade tracking and function.

Setting Table Square to the Blade

Adjusting table perpendicularity to blade for accurate cuts.

Saw Table Tilt

Tilting the table for bevel cuts up to 45 degrees.

Hand Guards

Adjusting hand guards for safe table tilting operations.

Blade Speed Selection

Band Saw Setup

Blade Speed Change

Instructions on changing V-belts to alter cutting speed.

Saw Blade Changing/Setting

Procedures for installing and tensioning a new saw blade.

Blade Guiding

How to adjust blade guides for optimal cutting performance.

Cutting Height Setting

Adjusting the upper blade guide for the material height.

Safety Rules

Additional Information

Connection to Power Mains

Optional Accessories

Dust Collection

Replacement Saw Blades

U.K. Supplement to Operating Instructions

Wiring Instructions

Instructions for connecting power cables and wiring standards.