Elektra Beckum Invert 130/40 User Manual

115 162 4029 / 0803 - 3.2
Bedienungsanleitung
Operating Instructions
Instructions de service
Gebruiksaanwijzing
Instrucciones de uso
Invert 130/40
Invert 130/60
Achtung! Lesen Sie diese Anleitung vor der Installation und Inbetriebnahme aufmerksam durch.
Attention! Carefully read through these instructions prior to installation and commissioning.
Attention! Prière de lire attentivement la présente notice avant l'installation et la mise en service.
Attentie! Lees deze instructies voor de installatie en ingebruikname aandachtig door.
¡Atención! Lea con detenimiento estas instrucciones antes de la instalación y de la puesta en servicio.

Elektra Beckum Invert 130/40 Specifications

General

Welding Method	MMA (Manual Metal Arc)
Input Voltage	230 V
Welding Current Range	10-130 A
Input Frequency	50/60 Hz
Rated Input Current	16 A
No-load Voltage	85 V
Duty Cycle	40% at 130 A
Protection Class	IP21

Summary

Technical Specifications

Scope of Application

Describes the intended use and versatility of the welding machines for various metal types.

Product Liability and Warranty

Outlines terms and conditions for product usage and warranty claims, emphasizing correct application.

Commissioning

Description

Controls Overview

Identifies and explains the various controls and components on the front and rear panels.

Operation

Stick Electrode Usage

Guide on selecting and using stick electrodes, including current settings and material thickness.

Welding Hints

TIG Welding

Practical TIG Operation

Instructions and tips for starting the arc and achieving good welding results with TIG.

Overloads and Trouble Shooting

Safety Precautions

Electric Shock Protection

Safety measures to prevent electrical hazards during operation and servicing.

UV Rays, Burns, and Fumes

Protective measures against welding hazards like UV radiation, burns, and toxic fumes.

Fire Prevention

Guidelines for preventing fires by managing combustible materials in the work area.

Wiring Diagram

Spare Parts List