Elektro-Automatik PSI 9000 DT Series User Manual

Elektro-Automatik
Operating Guide
PSI 9000 DT
DC Laboratory Power Supply
Attention! This document is only
valid for devices with rmware
“KE: 3.07” and “HMI: 2.17” and
“DR: 1.0.6” or higher. For avail-
ability of updates for your device
check our website or contact us.
Doc ID: PSI9DTEN
Revision: 05
Date: 10/2019

Elektro-Automatik PSI 9000 DT Series Specifications

General

Number of Channels	1
Control Interface	USB, Analog
Protection	OVP, OCP, OPP, OTP
Operating Temperature Range	0°C to 50°C
Cooling	Forced air