Elektromaten TS 958 User Manual

Electrical operating instructions
Door control panel TS 958
Software 1.2 - (Design and functions subject to change)
51171324 -
g 02.2013
en

Elektromaten TS 958 Specifications

General

Brand	Elektromaten
Model	TS 958
Category	Control Panel
Language	English

Summary

SAFETY DIRECTIONS - Basic and Regulatory

Basic Directions

Safety Regulations

SAFETY DIRECTIONS - Warnings and Precautions

General warnings and safety precautions

CONNECTING THE CONTROL AND THE ELEKTROMATEN®

MAINS SUPPLY

MOTOR CONNECTION (internal wiring)

PHASE ROTATION

RAPID ADJUSTMENT OF THE LIMITS

WIRING DIAGRAM

CONTROL PROGRAMMING - Modes and Functions

Operating mode

Configuration options for door operating modes.

Door position

Settings for door open and close limit positions.

Safety functions

Settings for door overload monitoring sensitivity.

CONTROL PROGRAMMING - Maintenance

MEMORY CHECK

SAFETY DEVICES - Input X2

Pass door / slack rope switch input X2

Details the pass door/slack rope switch input and its diagnostics.

SAFETY DEVICES - Mounting and Emergency Stop

Emergency stop X3

Wiring instructions for emergency stop and entrapment safety devices.

FUNCTION DESCRIPTION - Push Buttons and Control

Internal push button / Three push button / Key switch X5

FUNCTION DESCRIPTION - Overload Monitor

Door overload monitor

How the door overload monitor detects and adjusts to system changes.

FUNCTION DESCRIPTION - Cycle Counter and Monitor

Maintenance cycle counter

OPERATING STATUS DISPLAY - Pass Door and Emergency Faults

Pass Door and Emergency Faults

Fault codes related to pass door and emergency systems.

OPERATING STATUS DISPLAY - Limit and Drive Faults

Limit and Drive Faults

Fault codes for limits, internal faults, and drive unit.