6. THE USER INTERFACE
18
In the NAMING menu, turn the LEVEL/DATA knob to navigate between the character positions. Press and
hold [FUNC], and then turn the LEVEL/DATA knob to select a character for the highlighted position.
[FUNC] + [BACK] deletes the character before the highlighted position.
Press and hold [FUNC], and then press LEVEL/DATA to toggle between upper and lower case character.
Once you are done editing the name, press LEVEL/DATA and then Press “YES” to save, “ABORT” to can-
cel, or “EDIT” to keep editing.
Copy, paste, and clear commands are available on the NAMING menu. You can undo Paste
and Clear commands by repeating the command.
To Next Page
Loading...