14. KEY SHORTCUTS
48
14. KEY SHORTCUTS
You can use these key shortcuts to quickly perform certain tasks.
GENERAL
[FUNC] + [RECORD] performs a copy command. Action depends on the currently active page or mode.
[FUNC] + [PLAY] performs a clear command. Action depends on the currently active page or mode.
[FUNC] + [STOP] performs a paste command. Action depends on the content that was copied.
[FUNC] + [RETURN] (hold for a second) toggles fixed velocity ON/OFF
TRACK/PATTERN/BANK SELECT
[TRACK] + [T1-6] keys to select a track without triggering the track’s preset.
[T1-6] to select a track and trigger the track’s preset.
[PATTERN] + [TRIG 1-16] keys to select a pattern.
[PATTERN] + [T1-6] keys to select a bank.
PRESETS
[TRACK] + [RECORD] to copy a track preset.
[TRACK] + [STOP] to paste a track preset
[TRACK] + [PLAY] to clear a track preset
NAMING MENU
[FUNC] + turn LEVEL/DATA to choose a letter.
[FUNC] + press LEVEL/DATA to toggle between upper and lower case characters.
SAVING AND RELOADING
[FUNC] + [SETTINGS] temporary saves the active Pattern.
[FUNC] + [PATTERN] temporary reloads the active Pattern.
[FUNC] + [SETTINGS] (long press) saves Pattern to Project.
[FUNC] + [PATTERN] (long press) reloads Pattern from Project.
MENU ACCESS
[FUNC] + [PUNCH] opens the QUANTIZE menu.
[FUNC] + [GATE] opens the CLICK menu.
[FUNC] + [RETURN] opens the PAD SETUP menu.
[FUNC] + [LFO] opens the LFO SETUP menu.
[FUNC] + [TRACK] opens the TRACK SETUP menu.
[FUNC] + [RETRIG] opens the RETRIG SETUP menu.
[FUNC] + [PAGE] opens the pattern/track SCALE menu.
SEQUENCER SETTINGS
[FUNC] + [TEMPO] to tap tempo.
[TRACK] + turn LEVEL/DATA to move all trigs a whole step, left or right (when in GRID RECORDING mode).
[TRIG] key (hold) + [RETRIG], opens the TRIG REPEAT menu and turns retrig on for the trig (when in GRID
RECORDING mode).
[FUNC] + [GATE] (long press) toggles Click on/o.
SEQUENCER RECORDING
[RECORD] + [PLAY] starts LIVE RECORDING.
[RECORD] + [PLAY twice] toggles quantized LIVE RECORDING on/o.
To Next Page
Loading...