Elektron Cycles - Page 36

10. TRACK RELATED PARAMETERS
36
Color
Shape
Sweep
Contour
Color
Shape
Sweep
Contour
• For more information about the SHAPE parameter settings for the Chord machine, please
see “APPENDIX C: UNISON AND CHORD SETTINGS” on page 52.
• The MACHINES parameter can be parameter locked. In GRID RECORDING mode, press
and hold a [TRIG] key, and then press [MACHINES] twice to open the MACHINES menu.
Use the LEVEL/DATA knob to navigate and select the machine you want to assign to the
trig. For more information, please see “9.12.1 PARAMETER LOCKS” on page 29.