What to do if my ElektroPhysik MiniTest 7200 FH Measuring Instruments show 'Low Bat !!!'?
If your ElektroPhysik Measuring Instruments display “Low Bat !!!”, it means the batteries are running low. While you can still take measurements, it's best to replace the batteries soon. If the battery voltage drops too low, the device will automatically shut off. Remember to dispose of the old batteries according to your local regulations.
Why does my ElektroPhysik Measuring Instruments say 'Please check clock settings'?
The “Please check clock settings“ message on your ElektroPhysik Measuring Instruments appears when you insert new batteries for the first time, or if the device has been without power for more than 5 minutes. To resolve this, you need to reset the clock. Please refer to section 10.5.3 for instructions on how to do this.
General| Brand | ElektroPhysik |
|---|---|
| Model | MiniTest 7200 FH |
| Category | Measuring Instruments |
| Language | English |
Instructions for inserting batteries and connecting the sensor.
How to switch on the device, set language, and take initial readings.
Details about the main unit, its display, controls, and ports.
Details on battery and power supply options and usage.
Information on FH4/FH10 sensors and the sensor stand.
Accessing and navigating through the device's menus.
Description of Measure, Graphics, and Statistics screen layouts.
Customizing settings like language, volume, and auto-off.
How to input numerical and alphanumerical data.
Important factors for accurate thickness measurement.
Setting up batches, target ball size, and data logging.
Steps for preparing the device and performing calibration.
How to take readings with and without the sensor stand.
Methods for saving, logging, and deleting measurement data.
Common errors during measurement and their causes.
Errors related to sensor tilt, blockage, and air gaps.
Errors caused by magnetic interference and material properties.
Important notes and remarks for accurate calibration.
Description of factory, zero-point, and multi-point calibration.
Detailed instructions for factory, zero, and multi-point calibration.
How to delete calibration points.
Common problems during calibration and their remedies.
Overview of batches, batch data, and calibration references.
Managing data through directories and tree structure.
Steps for creating, deleting, and renaming batches/directories.
Setting specification limits and understanding statistical parameters.
Viewing readings, deleting data, and differential mode analysis.
Displaying and interpreting numerical statistical summaries.
Generating and interpreting histograms and trend diagrams.
Methods for printing data, including screen shots and batch print-outs.
Sending data to a PC via RS232 cable or Infrared (IrDA).
Accessing Database, Statistics, Calibration, and Active Batch.
Adjusting display, date/time, data output, and user preferences.
Configuring data transmission via RS232 or IrDA.
Viewing device and sensor technical details.
Performing initial setup and factory reset procedures.
Quick access to backlight, unit system, and print screen.
Instructions for cleaning the gauge and caring for NiMH batteries.
Information on device maintenance and authorized repairs.
Detailed specifications for the MiniTest gauge and its sensors.
List of items included in the gauge package and sensor details.
List of optional accessories available for purchase.
Guidance on identifying and resolving common device issues.
Understanding and fixing 'INF' flag error messages.
Definitions of key statistical terms used in analysis.
Essential safety guidelines for operating the device.
Statement of compliance with relevant regulations.
Information on customer support, repairs, and contact details.
To Next Page
