9. SPECIFICATIONS
Name Brush cutter
Brushcutter Model
DCBT43D-2S19
diameter blade 230 mm / 8000min
-1
Speed Max 8000 min
-1
spool diameter 440 mm / 7500min
-1
Handle type Both hands
Machine weight without cutting
device, without harness, empty
tank
7.05 kg
Weight of the machine with
accessories and empty tank
7.3 kg
Machine weight with full tank
and accessories
8.2 kg
Outward side 1800X640X250 mm
Power transmission method Automatic centrifugal clutch spiral gear
Reduction rate 1:0.8
Blade rotating direction Counterclockwise (from operator′s view)
Gasoline
Engine
Model
SPK1E40F
Type Single cylinder air cooling 2-cycle
Displacement 43 cm³
Max.Output
1.25kW/7500min
-1
Max.Torque
1.7 N·m/7000
min
-1
Fuel tank capacity
1,2L (1200cm³)
Mixing ratio 40:1
Lubricant oil FC2-Stroke engine oil
Carburetor Float piston valve
Sparking method IC-controled fly wheel magnet
Spark plug CDK L8RTC or CDK L7RTC or TORCH
L8RTC
Starting mehtod Recoil starer
Stopping method Sparking circuit primary short(push button)
Net weight
4.4 kg Engine with a full tank:5.3 kg
Sound emissions
Sound emission values measured according to the applicable standard:
Sound pressure L
PA
96 dB(A) K = 3.0 dB(A)
coustic power L
WA
107 dB(A) K = 3.0 dB(A)
Guaranteed sound power level L
WA
: 120 dB (A)
ATTENTION !
The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn.
To Next Page
Loading...
