ELEMENT Central Vacuum Systems
7
GENERAL INFORMATION
The central vacuum is designed to vacuum ordinary household dirt and
dust. The system is designed for dry pickup.
The central vacuum system is a network of inlet valves, 2” PVC tubing,
and low voltage wiring installed in the walls of your home. The dirt is
transported through the in-wall tube system back to the dirt canister
(removable lower portion of the power unit).
REGISTRATION
To register your Element Central
Vacuum System warranty in the
United States and Canada, register
online at www.cvacregistration.com
or fill out and mail the warranty
card located with this manual.
Proof of purchase or registration
of your Element Central Vacuum
System is required before any
warranty work will be performed
by an authorized Element Central
Vacuum dealer. Registration
ensures a fast and easy resolution
to your warranty requirements.
OPERATING INSTRUCTIONS
Using the central vacuum system
is easy. For standard systems,
simply raise the inlet valve lid,
insert the hose end and attach the
desired cleaning tool to the hose
wand. The power unit is activated
when the hose is inserted into the
valve. Please refer to accessory
instructions for further specifics on
usage.
When using the inlet valve on the
power unit (models 1300, 1700 and
2300 ONLY), the ON/OFF switch
must be in the ON position.
GENERAL POWER UNIT MAINTENANCE
The simple care and maintenance instructions included here will help
ensure trouble-free use of your central vacuum system.
• Do not place objects on top of the power unit. The motor could overheat.
• Do not allow the motor to remain ON unless a hose is connected or an
inlet valve is open. If airflow is not permitted to flow through fan blades,
motor damage could occur.
• Do not operate without a disposable bag in place in models DB3000,
DB5000, DB7000, DB8000 & DB9000. Use disposable bag 9637 in model
DB3000 and 9520 in models DB5000, DB7000, DB8000 & DB9000.
• Empty the dirt canister/disposable bag when it is 2/3 full.
• The power unit does not require any lubrication.
• The exterior of the power unit can be wiped with a clean, dry cloth. Do
not use liquid cleaners or water as an electrical shock may occur.
• For additional service contact the qualified servicing dealer written on
the front of this manual or locate an authorized dealer online at
www.elementvac.com.
To Next Page
Loading...