QUICK START GUIDE6 FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT 7
SETTING UP
YOUR TV
SETTING UP
YOUR TV
1
Installing the stands
WARNING: Your TV is heavy (>96 lbs)! A minimum of two people are required for installation.
Do not install the stands if you want to wall mount your TV.
You will need: Phillips screwdriver (not included)
1. Place the TV screen-down on a clean, at, so surface (e.g.: blanket) to prevent scratches
or damage to the screen.
2. Use a Phillips screwdriver to attach each stand with the provided screws.
3. Use the handles on the back of the TV to help li and place it upright on a stable, level surface.
To avoid damages, never carry your TV by holding or putting pressure onto the glass.
Use the attached handles when liing and take extra care when handling.
Mounting your TV
If you choose to wall mount your TV, please ensure your wall mount (not included) and supporting
structure can hold >96 lbs and is properly anchored.
Your TV has four mounting holes for a 600 x 400 mm VESA approved mounting bracket.
1. Place the TV screen-down on a clean, at, so surface (e.g.: blanket) to prevent scratches
or damage to the screen.
2. Mount the VESA bracket using four M8 x 28 mm (max depth) screws (not included) and
follow the mounting instructions provided with your wall mount.
If you have any doubts about your ability to safely install your TV, please consult a professional installer.
Handles
for liing
Handles
for liing
400 mm
600 mm
(continued)
To Next Page
Loading...
Need help?
General