Loading the bleach compartment (liquid bleach only)
• Add chlorine bleach to the bleach compartment. Do not over-fill the compartment.
• There is no water inlet to the bleach dispenser, so the bleach will directly load into the tub when you pour it in.
Caution
• Avoid splashing or over- filling the compartment.
• Never pour undiluted liquid chlorine bleach directly onto the load or
into the tub. Doing so can damage fabrics, by weakening of the fibers or
stripping the color.
Note
Do not pour color-safe bleach into the bleach compartment. Instead, add it
to the detergent compartment.
Loading the fabric softener compartment
• Pour the recommended amount of liquid fabric softener into the softener compartment. The dispenser
automatically releases liquid fabric softener at the correct time during the rinse cycle.
Caution
• Use the softener compartment only for liquid fabric softeners.
• Do not use the Downy Ball® in washer.
• Do not use liquid fabric softener that is too sticky as it may not mix with
the water sufficiently.
Step 4: Select the appropriate cycle and options for the load
1 Turn the cycle selector to select a washing cycle. For information on wash cycles, see Washer options and
settings on page 25.
2 Optional: Use the control panel buttons (like Water Level
) to customize the washing cycle. For descriptions
of buttons, See Control panel
on page 21.
For information about which buttons are available for each cycle type,
see Washer options and settings
on page 25.
OPERATING INSTRUCTIONS
To Next Page
Loading...