Basic operation
Use [GUIDE] button
Press the [GUIDE] button to display features of the ATSC program and the EPGfunction.
Use [DISPLAY] button
Press the [DISPLAY] button to view current source information.
Use [EXIT] button
Press the [EXIT] button to exit the OSD menu.
Select channels by numbers
To select a channel: Press the channel number you would like to go to. For example, to select channel number 120,
press buttons 1, 2 and 0, respectively.
Use [MENU] button
Press the [MENU] button to display the TV OSD menu.
Use [LAST] button
Press the [LAST] button to return to the previous channel.
Use [ENTER] button
Press the CENTER] button to select a particular item.
Adjust Volume
Press [VOL÷/VOL-] button to adjust the volume.
Use [CCD] button
Press the IceD] button to change the CCD mode. Using this button will set the Closed Caption mode when viewing
a DTV or TV channel.
Note: For DTV the options are CC1, CC2, CC3, CC4, Service1 or Service2. For TV and AV, the options are On or
Off. Additionally, this button stops the CD, DVD or VCR when the component is activated with the remote control.
Use [MT$/SAP] button
Press the [MT$/$AP] button to change the sound mode (Mono, Stereo, SAP). This button will select the MTS
options of Stereo, SAP,or Iqono in TV mode, alternate audio channels, and when available, in DTV mode.
Use [SLEEP] button
Press the [SLEEP] button repeatedmyto set the sleep time, which can be set to: 5 IV]ins, 10 Mins, 15 Hins, 30 Plins,
45 Plins, 60 Mins, 90 Mins, 120 Mins, :[80 Mins, 240 Hins, and Off.
Use [TIME] button
Press the [TIME] button to obtain the current time.
!6
To Next Page
Loading...
