7
1. As an added safety precaution, when removing the front guard of the
spoke guard you may have to use a small pall of pliers to unfasten the
safety clips when removing the front guard of the ictieular guard must
remove screw and clip on the external plastic ring.
2. Use in a dry place, free of excessive humidity.
3. Keep fan clean. Wipe away dirt with ft clean cloth and ordinary soap wipe
dry.
4. Do not use any harsh cleaners.
5. Before putting the fan in storage clean thoroughly cover with vinyl bag
and store in a dry place.
6. When reassembling fan, make sure to follow instructions of “Assemble”
chapter.
Important note:
Please save color box Returned goods will not be accepted if not packed
in original color box Thank you.
PLEASE READ COMPLETELY BEFORE OPERATING FAN
1. Guard
2. Blade
3. Oscillation knob
4. Motor
5. Switch Box
6. Slider switch
7. Switch box set screw
8. Cord
9. Inner pipe
10. Outer pipe
11. Base Cap
12. Cross- Bar Feet
13. Height adjustment knob
CAUTION
1. Do not plug the AC cord into the wall
outlet until fan has been completely
assembled.
2. Use power source of the fan according to electric nameplate at the back
of switch box.
3. Consumption: 70W
MAINTENANCE
PARTS IDENTIFICATION
To Next Page
Loading...
