Need help?Do you have a question about the Elenos ETG 800 and is the answer not in the manual?
General| Output Power | 800 W |
|---|---|
| Frequency Range | 87.5 - 108 MHz |
| Modulation | FM |
| Efficiency | > 72% |
| Dimensions | 1 Unit 19” Rack - 44 mm/1.73” (H) x 483 mm/19” (W) x 610 mm/24” (D) |
| Weight | 10 Kg / 22 lbs |
| Power Supply | AC |
| Cooling System | Forced air |
| Input Voltage | 90-260 VAC |
| Input Frequency | 50/60 Hz |
Information regarding authorized personnel for installation, operation, and maintenance.
Details Elenos' compliance with Directive 1999/5/CE and relevant standards.
General safety precautions for operating and handling the equipment.
Procedures for treating electrical burns and electric shocks.
Provides detailed technical specifications and data for the product.
Explanation of intelligent protection systems like IPF, IPC, and Safety Management.
Details on hardware-based protection mechanisms.
Instructions for connecting antenna, interlock, and power supply.
Guide to adjusting key operational parameters like frequency and power.
Overview of the device's main menu structure and navigation.
The main screen displaying and allowing modification of operating parameters.
Comprehensive list of possible alarms and events with their descriptions.
Instructions for connecting and configuring the device for PC communication.
Instructions for connecting the ETG as an exciter to a power amplifier.
Recommended periodic inspection and maintenance schedule.
Troubleshooting guide for common malfunctions, their causes, and solutions.
To Next Page
