7
7. Installation and operation instructions
7.1 Installation parts description
7.2 How to install
Suction nozzle
(thick, to clean deep nasal cavity)
Transparent cover
Suction nozzle
(thin, to clean nostril )
Collecting cup
Seal ring Silica gel cover
7.2.1 - Before installation, please check whether the product appearance is good and complete.
If there is any defect, please contact the supplier or manufacturer.
7.2.2 - Component installation:
a. Align the hole position of silica gel cover with the locating column on the cup, cover on
the collecting cup, and gently press around the silica gel cover to ensure it is installed in
place.
b. Install the collecting cup with the
locating column and aligne with the
gap of the cup base onto the body.
Locating
To Next Page
Loading...