To Next PageTo Next Page
Need help?Do you have a question about the elero DFM 100 and is the answer not in the manual?
Explains signal words, danger types, and accident prevention measures for safe operation.
States elero GmbH is not liable for injuries or damages from non-observance of instructions.
Details legally prescribed accessories for safe operation of rolling door drives.
Instructions for handling damaged drives and risks of improper handling.
Defines who should perform installation, operation, and troubleshooting.
Specifies the approved applications for rolling door drives and EMC guidelines.
Critical warnings for general, installation, and operation phases to prevent injury.
Lists guidelines and standards followed in the manufacturing of drives.
Requirements for safety checks before operation and after maintenance.
Essential safety precautions for electrical hookups to prevent electrocution.
Crucial safety warnings for installation to prevent bodily injuries.
Provides key specifications, ratings, and performance data for the drives.
Detailed diagrams showing physical dimensions for drive installation.
Charts detailing load capacities and safety brake specifications.
Tables showing maximum door weights for different safety gear systems.
Wiring diagrams and connection details for 3~400V and 1~230V drives.
Instructions for setting the operational and safety limit switches for door control.
Step-by-step guide to setting the upper and lower operating limit positions.
Procedure to set the drive for a partial door opening, e.g., for winter ventilation.
Method to suppress door-edge disconnection by setting a neutralisation limit switch.
Guidance on adjusting the safety limit switch for safe standstills in end positions.
Instructions for reconfiguring the drive from right-hand to left-hand roller setup.
Information on using the digital rotary encoder for end position settings.
Specific installation procedures for shaft-mounted drive configurations.
Safety precautions and procedures for making electrical connections during installation.
Steps for safely opening and closing the drive's protective covers.
Critical safety guidelines for operating the drive manually, especially during emergencies.
Procedure for manually operating the drive using the supplied crank handle.
Instructions for manual door operation using the haul chain mechanism.
A guide to common faults, their causes, and recommended remedies.
Information and contact details for seeking assistance with repairs.
Guidelines for the environmentally compliant disposal of the drive unit.
General
