elero DFM 750 User Manual

DIN EN ISO 9001: 2008
Certificate 01 100 070016/03
Contents Page
1. Safety instructions 2–4
2. Scope of supply 4
3. Installation 5
Technical data 6
Mounting dimensions 7
Lifting capacity chart 8
Electrical connection 9
Mechanical limit switch setting 10
Digital limit switch 11
Mounting of shaft mounted drives 12
4. Manual operation
Manual operations 13
5. Service 14
6. Manufacturer’s declaration 16
For the safety of persons it is important to follow these assembly instructions!
Keep the assembly instructions in a safe place!
Assembly instructions (translation)
148074702_EN_0713
Shaft mounted rolling door drives
DFM/DFE 100, 170, 250, 350, 500 and 750
WFM/WFE 170

elero DFM 750 Specifications

General

Brand	elero
Model	DFM 750
Category	DC Drives
Language	English

Summary

Safety Instructions

Safety Instructions - Continued

Important Safety Instructions

Lists critical warnings and precautions for general installation and operation.

Safety Instructions - Electrical

Safety Instructions for Electrical Connection

Provides crucial safety warnings for electrical connections and mains supply.

Installation - Safety

Safety Instructions for Installation

Provides crucial safety warnings specific to the installation process and potential hazards.

Technical Data

Lifting Capacity and Safety Brake

Electrical Connection

Setting End Positions and Functions

Limit Switch Settings

Details the procedure for adjusting the mechanical limit switches for door operation.

Adjusting the Operating Limit Switch

Step-by-step guide to setting the upper and lower operating limit switches.

Setting the Safety Limit Switch

Explains how to set or correct the safety limit switch for hazard prevention.

Mounting Shaft Mounted Drives

Mounting Shaft Mounted Drives

Electrical Connection - Shaft Mount

Safety precautions and steps for connecting shaft mounted drives to the mains supply.

Manual Operation

Safety Instructions for Manual Operation

Service and Troubleshooting

Fault Table