elero DFM 350 User Manual

DIN EN ISO 9001: 2008
Certificate 01 100 070016/03
Contents Page
1. Safety instructions 2–4
2. Scope of supply 4
3. Installation 5
Technical data 6
Mounting dimensions 7
Lifting capacity chart 8
Electrical connection 9
Mechanical limit switch setting 10
Digital limit switch 11
Mounting of shaft mounted drives 12
4. Manual operation
Manual operations 13
5. Service 14
6. Manufacturer’s declaration 16
For the safety of persons it is important to follow these assembly instructions!
Keep the assembly instructions in a safe place!
Assembly instructions (translation)
148074702_EN_0713
Shaft mounted rolling door drives
DFM/DFE 100, 170, 250, 350, 500 and 750
WFM/WFE 170

elero DFM 350 Specifications

General

Brand	elero
Model	DFM 350
Category	DC Drives
Language	English

Summary

Safety Instructions

General Safety Instructions

Covers general, installation, and operation safety points, including handling damaged devices and keeping children away.

Electrical Connection Safety

Safety precautions for electrical connections, emphasizing electrician involvement and switching off power.

Technical Data

Drive Specifications

Provides detailed technical specifications like voltage, current, power, torque, speed, and dimensions for various drive models.

Installation

Installation Safety Instructions

Safety advice for installation, including adapting parameters, preventing entrapment, and checking drive condition.

Lifting Capacity Chart

Permissible Door Weights

Electrical Connection Guide

Wiring diagrams and instructions for connecting DF. 100-750 and WF. 170 drives, including limit switches.

Limit Switch Settings

Instructions on setting operating and safety limit switches using adjustment screws and control cams.

Adjusting Operating Limit Switch

Step-by-step guide to set the upper and lower end positions using control cams and fine adjustment screws.

Safety Limit Switch Adjustment

Mounting Shaft Mounted Drives

Guidance on installing shaft mounted drives, including welding shafts and securing against axial displacement.

Electrical Connection for Shaft Mounted Drives

Safety precautions and connection steps for mains supply, checking rotation sense, and limit switch settings.

Manual Operation

Manual Operation Safety

Safety warnings for manual operation, emphasizing emergency use, switching off power, and safe positioning.

Service and Troubleshooting

General Service Caution

Fault Table

Lists common faults, their causes, and remedies for drive operation issues like non-running or overheating.