elero MonoTel 2 User Manual

MonoTel 2 867/868/915 MHz
28205.0001, 28206.0001,
28207.0001, 28205.0901,
28206.0901, 28207.0901
0682
Operating instructions (translation)
181221101_EN_0513
EN

elero MonoTel 2 Specifications

General

Frequency	868.3 MHz
Channels	1
Power supply	230 V AC
Type	Receiver
Supply Voltage	230 V AC

Summary

Safety Instructions

Safety Instructions for Radio Operation

Guidelines for safe and interference-free operation of radio systems.

Intended Use

Specifies the authorized applications and limitations for the MonoTel 2 transmitter.

Exclusion of Liability

Disclaimer regarding damages from misuse or unauthorized modifications.

Scope of Delivery

Lists the items included with the MonoTel 2 package.

Technical Data

Details technical specifications like operating voltage, frequency, and dimensions.

Operation

Safety Instructions for Radio Operation

General safety rules for operating radio systems and remote controls.

Intended Use

Defines the MonoTel 2 as a single-channel transmitter for specific applications.

Exclusion of Liability

elero GmbH disclaims liability for damages from non-intended use.

Scope of Delivery

Lists the components included in the MonoTel 2 package.

Technical Data

Provides specifications for the MonoTel 2, including frequency and physical dimensions.

Mounting of Wall Bracket

Device Explanation

Explanation of Functions

Bidirectional Radio System

Describes how bidirectional radio systems transmit signals and provide feedback.

Unidirectional Radio System

Explains unidirectional radio systems and their limitations in feedback.

Initial Operation

Instructions for switching on the transmitter and initial status display.

Status Display

Details the meaning of different status display indicators and LED ring colors.

Programming the Transmitter

Group Control Unit

Explains group control for managing multiple receivers simultaneously with one command.

Programming Additional Transmitters

Guides on adding multiple transmitters to a receiver.

Stopping Programming Mode

Stopping Programming Mode (Bidirectional) in the Transmitter

Procedure to exit bidirectional programming mode using the STOP button.

Approaching End Positions of Roller Shutter / Awning / Venetian Blind

Instructions for moving blinds/awnings to their end positions.

Intermediate Positions

Intermediate Positions of the Blinds

Overview of intermediate positions for different blind types and functions.

Programming the Intermediate Position in the Receiver

Steps to program a specific intermediate position for blinds.

Programming the Ventilation/Turning Position in the Receiver

Steps to program the ventilation or turning position for blinds.

Approaching the Intermediate Position

How to move the blind to a pre-programmed intermediate position.

Approaching the Ventilation/Turning Position

How to move the blind to the programmed ventilation/turning position.

Operation of the Transmitter using Combio JA Pulse

Using the transmitter with Combio JA Pulse for precise blind slat adjustment.

Deleting Positions and Transmitters

Deleting the Intermediate Position from the Receiver

Procedure to remove a programmed intermediate position from the receiver.

Deleting the Ventilation/Turning Position from the Receiver

Procedure to remove a programmed ventilation/turning position.

Deleting the Transmitter Channel in the Receiver

Steps to delete a transmitter channel from the receiver.

Deleting All Transmitters in the Receiver

Procedure to remove all programmed transmitters from the receiver.

Expert Settings

Battery Replacement

Cleaning

Disposal

Troubleshooting

Drive Not Running, Status Display Does Not Light Up

Troubleshooting steps for when the drive is not running and the status display is off.

Drive Not Running, Status Display Flashes Red or Orange

Troubleshooting steps for a non-running drive with a flashing status display.

Unidirectional: Status Display Lights Green

Interpreting a green status display in unidirectional mode.

Drive Runs in the Wrong Direction

Troubleshooting steps for when the drive operates in the incorrect direction.

Repair

EC Declaration of Conformity