To Next PageTo Next Page
Need help?Do you have a question about the elero VarioTel 2-915 and is the answer not in the manual?
General| Brand | elero |
|---|---|
| Model | VarioTel 2-915 |
| Category | Remote Control |
| Language | English |
Prerequisite for disturbance-free operation and fulfilment of defect claims.
Observe safety instructions to avoid bodily injuries.
elero GmbH's liability for damages from non-observance of instructions is excluded.
Transmitters undergo 100% testing and are made per guidelines.
Lists items included with the VarioTel 2.
For controlling roller shutters, awnings, sun protection with elero receivers.
System with reliable transmission and feedback from receiver to transmitter.
System with reliable transmission but no feedback from receiver to transmitter.
Observe safety instructions for radio operation to avoid risks.
Ensure wall bracket is fixed safely, avoiding electrical lines.
Step-by-step guide for fixing the wall bracket.
Explains the status LED colours and their meanings.
How to control multiple receivers simultaneously via channels.
How to select channels and switch between automatic/manual modes.
Receiver must be installed and within radio range for programming.
Step-by-step guide to program the VarioTel 2 transmitter to a receiver.
If the blind does not stop, repeat the programming process.
Steps to program multiple transmitters to a single receiver.
How to move the blind/awning to its lower end position.
How to move the blind/awning to its upper end position.
Defines intermediate, ventilation, and tilting positions for different blinds.
Steps to program a specific intermediate or ventilation position.
Steps to program a ventilation or tilting position for blinds.
How to move the blind to a pre-programmed intermediate position.
How to move the blind to a pre-programmed ventilation/tilting position.
Procedure to delete a programmed intermediate position.
Procedure to delete a programmed ventilation or tilting position.
Procedure to delete a specific transmitter or channel.
Procedure to delete all programmed transmitters from the receiver.
Lists operating voltage, battery type, protection class, temperature, frequency, dimensions.
Instructions for replacing the transmitter batteries with identical types.
How to clean the device using a damp cloth without cleaning agents.
Observe national regulations for proper disposal of electronic waste.
Lists common faults, causes, and remedies for drive operation.
Contact service team with item description and number for issues.
Declaration for ProLine 2-915 and its versions, describing its function.
Lists directives and standards the product complies with.
