39
- The double or triple zone can only be activated if the main zone of the hotplate is
set to between 1 and 9 and the hotplate is selected (indicated by a backlight).
- Activation of the double (triple) heating zone occurs after selecting the required
heating element by pressing the button 7. The switching occurs alternately double-
triple-off.
8.2.9 Stop and Start
- The stop and start functions are used to stop the heating elements from operating.
- If the Stop/Start button is on while the heating elements are running, all heating
elements will be switched off.
- Pressing the button for a second will re-energize all the heating elements.
8.2.10 Using the timer function on the appropriate hotplate.
- The heating element timer can only be programmed for a heating element that is
activated in any value between 1 and 9.
- After first pressing button 9, control of the heating elements can be carried out
using a countdown timer (the indicator of the cooking surface will not flash, all
indicators are either on or off).
- The second button presses a timer for one of the activated heating elements. The
cooking hob indicator will start to flash.
- The next press of a button will set a timer for the next active clockwise heating
element, etc.
- The timer value for the heating element is set by buttons 8 and 10, or slider 16 on
the respective surfaces.
- The timer for the heating element is switched off by pressing the buttons 8 and 10
at the same time, or by simultaneously pressing the button 16 on the right and left sides.
8.2.11 Buttons locking.
- The lock function is activated by pressing the "lock" button for at least 2 seconds.
- Any settings will be made by pressing the buttons (for example, heating settings).
Only turning off the appliance will be possible.
- Pressing the lock button 13 again for at least 2 seconds will switch off the lock
mode on the lock button 13 for at least 2 seconds.
8.2.12 Child lock
- To activate the lock, press the button 14 until the buzzer beeps, then press the
buttons 8 and 10 at the same time, or simultaneously press the button 16 on the right
and left side and hold for at least 0.5 seconds, but not longer than 1 second. The
appliance can then be locked by pressing the button 10. All displays of the heating
element will show "L" as confirmation of the activation of the lock.
- Child lock is deactivated just as it is activated. Press button 14 until the buzzer
beeps, then press buttons 8 and 10 simultaneously, or simultaneously press button 16
on the right and left sides and hold for at least 0.5 seconds, but not longer than 1 second.
The unit can then be unlocked by pressing the 8 button.
8.2.13 Touch safety switch
To Next Page
Loading...