for pers onal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CI RCUMSTANCES, CUT OR REMOVE THE
FROM THE POWER CORD.
EAR THING
CONNECTION
Connect the cold w at er supply hose to a thread ed 3/ 4(inch ) c onn ector and make s ure
that it is fastened tightly in place.
If th e wat er p ipes are new o r h ave not b een used for an e xt ended peri od o f t ime, let the
water run to make sure that thewateris clear. Thisp recaution is needed to avoidthe
risk of th e wa ter i nlet to be blo cked and dam age the a pp liance.
Improper connection of the equipment earthing conductor can result in the risk of an
electric shock.
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed.
Do not modify the plug provided with the appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician to install a proper outlet.
Insert th e drai nh ose into a dr ain p ipe with a m inimum diam eter of 4 0mm, or l et i t run into the sink , mak ing sur e t o
avoid bending or crimping it. The topof the hosemust be lessthan 1000mm.
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ 40m m
B
Pl ease clo se the hydrant a fter u sing.
To Next Page
Loading...