MOUNT A CAMERA
Ring Light comes with a camera ball head mount
featuring the industry standard 1/4 inch threaded
s
crew.
To attach a camera to Ring Light, hold the camera
in place with one hand while turning the ball head
with the other hand to secure the cam-era. After
the camera is secure, fasten the mount into place
by using the tightening screw.
The maximum supported weight of the camera
mount is 2.00Kg /4.5lbs. Ensure that the camera,
including lens does not exceed the weight limit.
If the camera has a particularly long or heavy lens
attached, extra tightening of the ball head mount
may be required to stop the camera from tilting
f
orward.
max. 31 cm / 12.2 in
MAXIMUM LOAD
2,00 kg / 4,50 lbs
To Next Page
Loading...
