5 Technical Data
5.1 Identification
The type label serves for the identification of the unit. It is located on the housing of the sensor and gives the
exact type designation (Article designation = order reference, see type designation, chapter 7) with the corre-
sponding part number (ELGO Part No.).
Furthermore, the type label contains the hardware and software versions, a unique, traceable device number
(Serial No.), the production date (Batch No.) as well as (if available) the customer part number (Ident No./Type).
When corresponding with ELGO always indicate this data.
Figure 1: Type label for identification of the Safe Box
Figure 2: Info label with additional information
Concerning Figure 2, the rated speed (here: 4.0) and the “Brake type” (here: SG) are only examples.
To Next Page
Loading...
Need help?
General
