Need help?Do you have a question about the ELICA WAVE and is the answer not in the manual?
General| Motor power | 270 W |
|---|---|
| Noise level | 62 dB |
| Intensive speed | Yes |
| Number of speeds | 3 |
| Type of extraction | Recirculating |
| Maximum extraction power | 400 m³/h |
| Type | Pendant |
| Control type | Sensor |
| Product color | Black |
| Housing material | Stainless steel |
| Grease filter type | Aluminum |
| Bulb power | 40 W |
| Number of bulbs | 4 bulb(s) |
Weight and Dimensions| Width | 510 mm |
|---|---|
| Height | 360 mm |
Hood designed for recirculating filtering version, aspirating and filtering fumes.
Requires specialised personnel; specifies minimum distances from hob.
Connects to mains supply; requires bipolar switch and earth connection.
Surface mounting requires expansion wall plugs; qualified technician verification advised.
Details key components like interconnection cable, control lever, filters, and bulbs.
Details recommended usage times and control methods (touch/remote).
Auto-activates motor at first speed if room temp exceeds 70°C via sensor.
Controls speed via T1 button; LED indicates speed; 4th speed has a 5-min limit.
Center light is controlled by pressing the T2 button on the control panel.
Side lights controlled by holding T2; also regulates intensity (except neon lights).
Resets the GREEN LED indicator after cleaning grease filters.
Resets the ORANGE LED indicator after replacing carbon filters.
Disables the carbon filter saturation signal for specific uses.
Steps to remove the control panel, requiring grid disconnection and filter removal.
Controls speed, lights, and filter reset signals; detailed button functions provided.
Covers cleaning, battery replacement (12V MN21/23), and battery disposal.
Always disconnect power before maintenance; follow safety precautions.
Clean internally/externally regularly with mild detergent; avoid abrasives/alcohol.
Clean monthly by hand or dishwasher; discolouration is normal.
Wash every two months; dry in oven; replace every 3 years or if damaged.
Use specified halogen lamps (GU10/E14); disconnect power and ensure bulbs are cool.
To Next Page