1. INTRODUCTION
This document contains information about how to install and operate your S200 price computing
scale. Please read carefully the manual before using the device.
1.1 Precautions
• Use the manufacturer approved power adapter provided with the scale. The use of
improper type of adapter could damage the device.
• Do not place loads heavier than the maximum weight limits specified in this document.
• Place loads carefully on the weighing pan.
• Do not immerse the scale in water or any other liquids.
• Do not use the scale in hazardous environments.
• The scale should be used in environments free from dust, high humidity, corrosives,
vibrations, extreme temperature fluctuations and excessive air movements.
• Do not place the scale on unstable surfaces.
• Avoid placing the scale near heaters or in direct sunlight.
• Switch off and disconnect the scale from the power supply before cleaning or servicing.
• Always grab the scale from the bottom when moving, do not grab the weighing pan.
• Disposal of this product and its accessories should be in accordance with your local
regulations.
2. INSTALLATION
2.1 Package Contents
Inside the package you should find:
To Next Page
Loading...
