Need help?Do you have a question about the Eliminator Lighting EM20 and is the answer not in the manual?
Read instructions, check product condition and accessories after unpacking.
Contact details for support and the process for warranty returns.
Details warranty terms for ADJ Products, LLC brands and specific warranty periods.
Keep away from flammables, use indoors, avoid direct light exposure, risk of shock.
Do not disassemble, disconnect power for cleaning, handle with care.
Clean with dry cloth, check fasteners and rigging points for safety.
Lists the 20" Mirror Ball and its primary/secondary mounting eyelets.
Emphasizes qualifications, flammable material distance, and professional consultation.
Use both eyelets, appropriate hardware, secure structure, safety cable.
Instructions for attaching an optional safety cable to the mirror ball.
Guidance on positioning lights for desired effects.
Addresses ceiling mounting, eyelet usage, light inclusion, and product sizes.
Explains the recommended method for cleaning the mirror ball surface.
Lists model, dimensions, weight, and provides dimensional drawings.
General| Type | Moving Head |
|---|---|
| Light Source | LED |
| Wattage | 20W |
| Beam Angle | 13 degrees |
| Power Consumption | 30W |
| Pan Range | 540 degrees |
| Voltage | AC 100-240V, 50/60Hz |
| Control | DMX, Sound Active, Auto, Master/Slave |
| Operational Modes | DMX, Auto, Sound Active, Master/Slave |
| Tilt Range | 270 degrees |
To Next Page
