Eliminator Lighting Mini Par RGBW LED

To Next Page

Mini Par

RGBW LED

SPECIFICATIONS:

Model: Mini Par RGBW LED

Voltage: 100V-240V 50/60Hz

LEDs: 12 x 1W LEDs

(3 Red, 3 Green, 3 Blue,

& 3 White LEDs)

Beam Angle: 25 Degrees

Power Consumption: 14W

Weight: 1lbs./ 0.5kgs.

Size: 153 x 145 x 95mm

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 3 DMX Channel Modes:

4/6/8 Channels

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

The Mini Par RGBW LED has been tested at the factory, there is no assembly required. The unit is

ready to be plugged into a power outlet. This unit has 3 DMX channel modes; 4/6/8 channels. It has

6 operating modes; RGBW Dimmer mode, Jump change mode, Fade mode, Pulse change mode,

Sound Active mode, or DMX mode.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use. Always

disconnect main power before replacing fuse.

Remember to always replace with the exact same

type fuse.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Customer Support: Office: (323) 316-9706

Fax: 888-287-5224

Web: info@eliminatorlighting.com

Need help?

Do you have a question about the Eliminator Lighting Mini Par RGBW LED and is the answer not in the manual?

Summary

Safety and General Warnings

Installation and Operation Caution

General warnings to read and understand before installing or operating the unit.

Unit Handling and Fuse Replacement

Precautions for safe unit handling and fuse replacement, emphasizing disconnecting power.

Operating Modes Overview

Unit Setup and DMX Modes

Introduction to unit setup, available DMX channel modes (4/6/8), and operating modes.

Warranty and Support Information

One Year Limited Warranty

Details the 1-year limited warranty covering manufacturing defects within the United States.

Customer Support Contact

Provides office, fax, and web contact details for customer support.

DMX Control Functions

DMX Mode Operation

Instructions for setting DMX address and channel mode using a DMX controller.

Jump Change Mode

Guide for adjusting jump change speed and activating strobe effects.

Pulse Change Mode

Guide for adjusting pulse change speed and activating strobe effects.

Additional Operating Modes

Fade Mode

Instructions for adjusting fade speed and activating strobe effects.

Sound Active Pulse Mode

Guide for adjusting sound sensitivity and activating strobe effects.

RGBW Dimmer Mode

Instructions for adjusting individual Red, Green, Blue, or White color intensity and strobe.

DMX Channel Functions Chart

4 Channel Mode Functions

Details the functions for Red, Green, Blue, and White in 4-channel DMX mode.

6 Channel Mode Functions

Details the functions for Dimmer, Red, Green, Blue, White, and Flash in 6-channel mode.

8 Channel Mode Functions

Details functions for Dimmer, colors, modes (ASC, ACC, Fade, SOUF), and flash in 8-channel mode.