• Supports EL Standard accessories and OCF with the
included Elinchrom OCF Adapter
• Lightweight complete unit only 1.5kg / 3.3lbs
• Small Dimensions; 23x16,5x10,5 cm / 9x6.5x4.1 inch
Elinchrom TTL
The TTL (Through the Lens Metering) mode allows you to
access fully automatic exposure setups according to your
digital camera.
If you wish to work in the Manual mode or combine both
modes, the unit enables you to save the TTL exposure
parameters as a starting point when passing to the
manual mode. The unit supports Skyport radio remote
control, TTL and HSS at full power and the fastest ash
durations at low power levels. To operate the unit in the
TTL mode, please use the radio remote Elinchrom Pro
and activate the TTL function.
• 5 f-stop ash power range
• TTL +/- 3 f-stops adjustable in 1/3 steps.
• Compatible with Canon, Nikon, Fujilm, Sony,
Olympus / Panasonic and Pentax
Manual mode
• Compatible with all Skyport Transmitters
• Flash power in 1/10 f-stop steps
• Saves the TTL power as a starting point for the
Manual mode.
User manual ONE ELINCHROM — 7
To Next Page
Loading...
