Tilt Head
The metal tilt head is removeable, xed
with a ¼ inch screw lock to pack the unit
small if needed or to x the ONE to other
standard supports, boom arms, grips etc.
It includes the umbrella tting as well for
7-8mm umbrella shafts and a two-way
mount option for stands.
Troubleshooting
Error Table
Error
number
Description Solution
1 Capacitor overvoltage Switch the unit
off, wait
2 minutes and
switch
the unit on again. If
the error shows up
again the unit
requires
a check-up at an
authorised
Elinchrom
Service Centre.
4 Charge timeout
6 Charge hold error
8 Charge circuit error
18 Discharge circuit error
32 Head type unkonw
33 14VDC error
User manual ONE ELINCHROM — 27
To Next Page
Loading...
