Elinchrom ONE - Modelling Lamp and 65 W Charger Operation

Modelling Lamp
Short touch
to access
and change
the colour
temperature
Swipe down to
access the
modelling lamp
menu
Swipe left/right
to change
values
Charging / 65W USB C Wall Charger
Use only the original Elinchrom ONE USB C Charger to
recharge the built-in Li-Ion battery.
• Recharging time: Approximately 100 min. to 100% ,
when the unit is switched on (Fast charge mode).
• Battery capacity min./max power: 9700 / 725 ashes
per charged battery
• Recharge the unit only at temperatures from 0° C
to 35° C
• Recharge the Li-Ion battery before storing the unit
• If the unit is not used frequently, recharge the unit
after latest 3 months
22 — ELINCHROM ONE User manual