EasyManua.ls Logo

Elipson MC Mini - Page 11

Elipson MC Mini
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2120
UKUK
WARNINGS
Unpacking : The packaging (boxes and foam) was designed to effectively protect your ELIPSON electronics
during transport and shipping. Please retain them for later use.
Protect the environment : If you wish to dispose of the packaging, keep in mind that it is recyclable. Please
follow the appropriate steps to guarantee the protection of the environment according to your
available facilities (for example, materials sorting). At the end of its life cycle, you should not throw
this instrument into a standard waste receptacle. It should be brought to a recycling center for
electronic equipment. This symbol on the product indicates
that it was designed to be recycled
preservation. This device respects the RoHS European Directive. This means that it does not emit polluting
substances when it is recycled (lead, mercury, cadmium, hexavalent chromium, polybromobiphenyls,
polybromodiphenylethers).
Precautions for use : This product is built according to rigorous norms and complies with security standards.
Nevertheless, you should use it under normal conditions as described below. Verify the
electrical currency voltage before plugging into the electrical outlet. This electronic device
was designed to function in several countries. Verify that the electrical vo
ltage chosen in the
back of the device corresponds to your country’s current. We recommend that you connect
Handle the electronic cord with care. When you unplug the power cord from an outlet,
grasp it from the plug and not from the cable. If you do not expect to use the device for an extended period
of time, unplug it from the outlet. Do not open the case. This device contains no part that the consumer can
result in invalidation of the guarantee. If an object or liquid enters the case, contact the vendor to arrange for
a technician to remove it from the device to ensure safety. The apparatus shall not be exposed to dripping
coupler is used as disconnect device, the disconnect device shall remain readily operable.
V. SPECIFICATIONS
• Power : 2x 80W / 4 ohms (2x 40W / 8 Ohms)
Bluetooth aptX
Bluetooth input
Optical input
• AUX input (3.5mm mini-jack)
• AUX RCA input (L and R)
IR input (3.5mm mini-jack)
Subwoofer RCA output
• Line out (3.5mm mini-jack)
Speakers output (x2)
• USB port for charging (5V/500mA)
Stand by / wake up mode
• Remote control
Deported IR sensor
• Mounting brackets
Dimensions : W210 x H60 x D210 mm
210 mm
210 mm
60 mm
The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc.
and any use of such marks by Elipson is under license. Other trademarks
and trade names are those of their respective owners.
Qualcomm aptX is a product of Qualcomm Technologies International,
Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered
in the United States and other countries, used with permission. aptX is a
trademark of Qualcomm Technologies International, Ltd., registered in
the United States and other countries, used with permission.
WARRANTY
Elipson electronics has been designed and manufactured to the highest quality standards. If something goes
wrong with your product, Elipson or its authorized distributor / dealer will handle the service and repair under
these limited warranty terms. This limited warranty is valid for a 2-year period from original purchase date from
an authorized Elipson dealer.
Terms of limited warranty
The warranty is limited to equipment repair. Neither transportation, nor any other costs, nor any risk for removal,
transportation and installation of products is covered by this warranty. The warranty is only valid for the or
iginal
purchaser and is not transferable. The warranty will not apply in cases other than defects in materials and / or
workmanship at the date of purchase and will not be applicable in the following cases :
- Damages caused by wrong or incorrect installation or connection.
- Damages caused by incorrect use, other use than the one described in the owner’s manual, negligence,
are not authorized by Elipson.
- Damages caused by unauthorized, unsuitable or faulty ancillary equipment.
Elipson control or responsibility.
- For products, which serial number has been altered, deleted, removed or made illegible.
- In case of repair and service executed by an unauthorized service person.
This warranty complements any national/federal/regional law obligations of local distributors/dealers and
does not affect your statutory rights as a customer.
To claim repair under warranty
To claim repair or service under warranty you simply have to contact your local Elipson dealer, from whom
your equipment has been purchased. To ensure that you will be able to ship your damaged product in correct
manner, always retain the original packaging of your Elipson equipment. If
you cannot contact your original
dealer, or if you are using your Elipson product outside the purchase country, you should contact Elipson
national distributor in the residence country, who will advise where the equipment can be serviced.
You can also visit our web site to check our contact information : www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your original purchase invoice
specifying the date of purchase and stamped by your dealer.
© Elipson 2018 - Elipson is a registered trademark of AV Industry.
IV. OPERATION
1. LED indicators
Standby mode : solid red/solid white
Optical mode : solid white
AUX 1 mode : solid white
AUX 2 mode : solid white
2. Use
Make sure the On/Off switch on the rear of the MC mini is ON.
To turn on the MC mini, press the
.bonk emulov eht sserp gnol ro ,lortnoc etomer eht fo nottub
To turn off the MC mini, press the .bonk emulov eht sserp gnol ro ,lortnoc etomer eht fo nottub
To switch between modes, short press the volume knob.