To Next PageTo Next Page
Need help?Do you have a question about the Elipson planet L and is the answer not in the manual?
Prepare ceiling mount, select screws/dowels based on material, and choose mounting method.
Connect components like B1, B4, and B6 as per diagram for initial setup.
Adjust locker position carefully to avoid scratching the sphere during installation.
Adjust cable lengths and trim excess cables which overtake above the ceiling mount.
Position the mount and speaker assembly using one of two provided methods.
Use the security lock screw (A1) to firmly secure the ceiling mount.
Gently place the loudspeaker into the center of the ring assembly.
Connect speaker wires to terminals, ensuring amplifier is turned off beforehand.
Re-adjust the locker position to prevent scratching the sphere.
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Driver diameter | 165 mm |
| Tweeter diameter | 25 mm |
| Number of drivers | 2 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 6.5 \ |
| Tweeter diameter (imperial) | 1 \ |
| Product color | Red |
| Housing material | - |
| Recommended usage | Universal |
| Recommended amplifier power (max) | 80 W |
| Recommended amplifier power (min) | 30 W |
| Impedance | 6 Ω |
| Sensitivity | 90 dB |
| Frequency range | 48 - 20000 Hz |
| Crossover frequency | 3800 Hz |
| Equalizer | No |
| Connectivity technology | Wired |
| Package depth | 428 mm |
| Package width | 405 mm |
| Package height | 423 mm |
| Package weight | 8500 g |
Weight and Dimensions| Width | 290 mm |
|---|---|
| Weight | 7000 g |
