lease read this
uide prior to installation.
● Make sure the current rating is equal to that of the appliance rating when an extension cord is used.
● Do not use any accessories not provided by the manufacturer with this screen. We will not be responsible for
any risks of fire, electric shock, or injuries resulting from the misuse of this product with accessories not
designed for use with this product.
● Make sure the screen is mounted in a horizontal level position. We suggest consulting with a professional if
you are unsure on how to perform a proper installation.
INSTALLATION
The CineTension 2 series screen is designed for installation on either a wall or ceiling. All hardware is included to
allow either installation method however we do strongly recommend a professional installation for safety purposes.
The extruded hanging brackets are designed to slide anywhere on the back of the screen to accommodate a
wall or ceiling installation and provide an easy alignment with wood studs and trusses.
Please follow the steps below for recommended installation instructions.
Mounting Hardware Kit – Please make sure all of the following items have been supplied before proceeding
installation.
Parts identification:
1. Begin by sliding the Bolts (B) thru the left and right slide channel located on the top back of the CineTension 2
screen’s casing as shown on picture.
D
Qty 2 –Extruded
Hanging Brackets
C
Qty 2 – Masonry screws
Qty 2
Masonry anchors
B
Qty 2 - Bolts
A
Qty 2 – Wood Screws
Qty 2 – Drywall Anchors
To Next Page
Loading...
Need help?
General
