ezCinema Series – Quick Set up Guide
Step 1: Position the swivel foot
Rotate the swivel foot one half turn so that they point outwards as pictured above. This is so that the screen can be stable once the
screen has been set up.
Step 2: Open the box cover
Unlatch the housing’s cover. Secure the box with one hand while removing the telescopic support rod with your other hand.
Step 3: Installing the support rod
First, make sure that the hanging hook is pointing toward the front facing the same direction as the screen, then insert the square end
of the telescopic support rod into the support plate.
Step 4: Pull up the screen
Hold the pull hook with one hand and pull the screen up gently and hang it on the bracket hook. Then, be sure to tighten the locking
sleeves once you’ve reached the desired height.
This is only a quick set up guide. Please visit our website for a complete
USER GUIDE on your ezCinema Series. For More Information or tech
support, please visit www.elitescreens.com
To Next Page
Need help?
General
