Elite Screens Yard Master Electric User Manual

Updated 05/25/17 1 www.elitescreens.com
Yard Master Electric
Vertical Limit Switch Adjustment Instructions
For technical support or further assistance, call 877-511-1211 x604
ATTENTION: Elite Screens does not recommend making unnecessary adjustments to the screen, as
improper adjustments will damage the unit and void your warranty.
Caution: The screen’s Top Black Masking is already set to its maximum distance. There is NO extra
black top drop in the roller. Attempting to increase the drop will damage the motor and VOID your
warranty with Elite Screens. DO NOT use these instructions to try and get more out of your standard
black masking drop. Please contact Elite Screens before making any adjustments.
Adjustment tool needed
The adjustment screws are located on the left side of the screen.（as you are facing the front of the
screen）
5/32” Allen wrench
Lower limit adjustment screw is covered with a
warning sticker.

Elite Screens Yard Master Electric Specifications

General

Gain	1.1
Aspect Ratio	16:9
Case Color	Black
Installation Type	Free-standing
Motorized Operation	Yes
Built-in Battery	Yes
Screen Material	CineWhite®
Viewing Angle	180°
Features	Portable
Screen Type	Electric
Remote Control	Yes

Summary

Vertical Limit Switch Adjustment Instructions

Important Warnings and Cautions

Provides critical ATTENTION and CAUTION notes regarding potential damage, warranty voidance, and limitations of screen adjustments.

Required Adjustment Tool

Identifies the specific tool needed for screen adjustments, which is a 5/32" Allen wrench.

Adjusting Screen Retraction

Instructions for adjusting the screen to fully retract into the housing using the upper limit screw counterclockwise.

Setting Upper Limit Stop

Procedure to adjust the screen to stop automatically at the top limit by turning the top limit screw clockwise.

Adjusting Screen Drop

Guidance on increasing or decreasing the screen's drop by adjusting the lower limit screw.