Elite Screens Kestrel Series How To Replace

Rev111010-ESC
www.elitescreens.com
3. Carefully remove the end
cap cover to avoid pulling out
the motor.
5. Push the cover to the side
to remove it.
4. After removing the end cap
cover, you will notice a metal
box directly behind the
screen’s material. This metal
box houses the circuit board.
Loosen and remove the
screws that hold the cover of
this metal box.

Elite Screens Kestrel Series Specifications

General

Brand	Elite Screens
Model	Kestrel Series
Category	Projection Screen
Language	English