Elite Screens Kestrel Series How To Replace

Rev111010-ESC
www.elitescreens.com
6. For easier access of the
circuit board housing, push
the power cord underneath
the screen so that it is out of
the way.
8. Detach indicated wires from
the circuit and remove the
small screws that hold it in
place. Then, remove the
circuit board. Do the reverse
of step 8 instructions to
replace the new circuit board.
7. To open the circuit board
box cover, push in on the tab
as shown in the picture and
pull the box open with both
hands simultaneously.

Elite Screens Kestrel Series Specifications

General

Brand	Elite Screens
Model	Kestrel Series
Category	Projection Screen
Language	English