Elite Screens Kestrel Series How To Replace

Rev111010-ESC
www.elitescreens.com
15. Fully extend the power
cord out of the casing before
completely sealing the end
cap back in to place.
16. Put the end cap back in to
place and tighten the end cap
with the provided screws as
shown in the picture.
17. Check for any loose wires
that may be sticking out of the
casing. The slit for the screen
should be clear for a smooth
deployment of the material.

Elite Screens Kestrel Series Specifications

General

Brand	Elite Screens
Model	Kestrel Series
Category	Projection Screen
Language	English