Elite ARC 130XP - Equipment Adjustment Instructions (MMA); Parameter Adjustment Overview (MMA); MMA Process Current and Arc Force Adjustment; MMA Process Hot Start Adjustment

KEEP WORKiNG
Keep Working
KEEP WORKiNG
13
Si6130XP Si7160XP
Si7175XP Si7200XP
The MMA process is default when turning on the
equipment.
To adjust the current turn the knob.
As the current range varies, the recommended electrode
also changes.
The MMA process is default when turning on the equipment.
Press the knob to switch between parameters.
Turn the knob to regulate the parameter value.
INSTRUCTIONS FOR ADJUSTING THE EQUIPMENT
MMA PROCESS
To adjust the value of ARC FORCE press the knob.
When pointing to the indicator turn the knob to adjust
to the required value. This value can be adjusted in a
range of 0 to 10.
To adjust the HOT START value, press the knob.
When pointing to the indicator turn the knob to adjust
to the required value. This value can be adjusted in a
range of 0 to 10.
Each time you press the knob the displayed value will be saved and move to the next parameter.