Elite ARC 130XP - TIG Lift Arc Process Operation; Switching to TIG Process and Current Adjustment

KEEP WORKiNG
Keep Working
KEEP WORKiNG
14
Si6130XP Si7160XP
Si7175XP Si7200XP
To use the TIG process , turn on the equipment and press the knob 3 times.
To adjust the current turn the knob.
TIG PROCESS
elite ARC 160XP
SI7160XP
elite ARC 175XP
SI7175XP
elite ARC 200XP
SI7200XP
in
1
3
2
1. L.E.D. Digital panel
2. MMA / TIG LIFT ARC selection button.
3. Amperage adjustment knob, with parameter selection push button