Need help?Do you have a question about the Elitech RCW-600WIFI and is the answer not in the manual?
General| Model | RCW-600WIFI |
|---|---|
| Temperature Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Connectivity | WiFi |
| Battery | Rechargeable lithium battery |
| Certification | CE, RoHS |
| Type | Temperature and Humidity Data Logger |
| Temperature Accuracy | ±0.5°C |
| Humidity Range | 10%RH~95%RH |
| Humidity Accuracy | ±3% RH |
| Record Interval | 10 seconds to 24 hours |
| Alarm Range | Configurable high and low limits for temperature and humidity |
| Operating Environment | -30°C to 60°C, 0% to 95% RH |
| Report Generation | |
| Record Capacity | 16000 points (8000 for temperature and 8000 for humidity) |
Use a smart phone or PCs to search and connect corresponding device's WiFi under the name of: '600wif*****'.
Prick the Reset hole for 5 seconds to reset the device if you want change device's WiFi access.
Type in IP address in any web browser: http://192.168.2.1/.
Default user name: admin, Default password: admin.
To Next Page