ELITONE CAD-1114 - Caring for the Product

22
Unitwillnot
charge
ChargingCable notconnected
toasuitablepowersource
See“Battery,Charging,Discharging”
ChargingCablemaynotbe
fullyinserted
Checkthatbluecableportcoverisnotintheway.Fully
presscableenduntila“click”isfelt.
Unitdamaged ContactElidahCustomerService
SolidRedLED Aninternalerrorhasoccurred
withinthedevice
Afteraminute,thedeviceshouldreboot.Contact
ElidahCustomerService iftheproblempersists.
CaringfortheProduct
Controller,Cables,andBeltClip
 DonotallowtheControllerorcablestogetwetorbeleftinexcessivesunlight.
 Wipewithslightlydampenedcloth.DonotallowwatertoentertheController.Useofaggressive
cleaners,solventsoralcoholmaydamagetheproduct.
 Thebatteryisnotaccessibleorreplaceable.Donotattempttoremovethebattery.
 Donotattempttorepairadamagedormalfunctioningdevice.
 TheControllercontainsalithiumpolymerbatteryandotherelectricalcomponentsthatshouldbe
disposedofinaccordancewithlocalregulation.