Elka EST 204 - User Manual

Installation and operating instructions
Slide Gate Openers
EST 204 – EST 404 - EST 804
Contents : Page
1. Usage 2
2. Technical Data 2
3. Measurements 2
4. Installation 3
5. Emergency release and height adjustment 3
6. Mounting the rack 4
7. Electrical setup (Connection examples) 5
8.
MO 56/S controller for EST 204 / 404
6
9. Operating modes MO56 (DIP switches) 7
10. Safety functions MO56 8
11. Learn mode MO56 9
12. After power break / emergency mode 11
13. Error codes MO56 11
14.
MO 43 controller for EST 804
12
15. Operating modes MO43 (DIP switches) 13
16. Setting personal code for radio remote 15
17. General notes to safety 16

Elka EST 204 Specifications

General

Model	EST 204
Category	Gate Opener
Operating Voltage	230 V AC
Operating Temperature	-20°C to +55°C
Power Supply	230V AC

Summary

Usage

Technical Data

Measurements

Measurements of EST 204; 404

Technical dimensions and diagrams for EST 204 and EST 404 gate openers.

Measurements of EST 804

Technical dimensions and diagrams for the EST 804 gate opener.

Installation

Emergency release and height adjustment

Mounting the rack

Electrical Setup

MO 56;S controller for EST 204; 404

Input terminals MO 56;S

Details on the input terminals and their functions for the MO 56/S controller.

Output terminals MO 56;S

Indication lights on the MO 56;S

Operation modes MO 56;S (DIP switches)

Automatic closure (S1)

Configuration of the automatic closure function using DIP switch S1.

Warning prior to opening (S2)

Setting the warning light duration before gate opening with DIP switch S2.

Warning prior to closing (S3)

Setting the warning light duration before gate closing with DIP switch S3.

Photocell test (S4)

Enabling and configuring the photocell test function with DIP switch S4.

Safety functions MO 56;S

Stop contact

Functionality and usage of the stop contact (TS) for gate control.

Force detection

How the controller detects and reacts to excessive force during gate movement.

Running time control

Management of motor running time to prevent over-travel.

Safety contact strips

Operation and testing of safety contact strips (SLA/SLZ).

Photocell

Overview of photocell functionality and configuration options.

Photocell test

Detailed procedure for testing photocell functionality.

Traffic lights

Learn mode MO 56;S

Learning the running time, the required force and photocell status for LS-test

Procedure to learn running time, force, and photocell status for MO 56/S.

Learning the radio code for BT

Process for programming radio transmitter codes (BT) into the MO 56/S.

Deleting the radio code for BT

Steps to remove programmed radio transmitter codes (BT) from MO 56/S.

Learning the radio code for BTG

Process for programming radio transmitter codes (BTG) into the MO 56/S.

Deleting the radio code for BTG

Steps to remove programmed radio transmitter codes (BTG) from MO 56/S.

Learning the pause time for automatic closure

Setting the delay time for automatic gate closure on MO 56/S.

Learning the warning time prior to closing

Setting the warning light duration before gate closing on MO 56/S.

Learning the BTG position

Configuring the specific position for partial opening (BTG) on MO 56/S.

Alter the force reserve

Set all parameters back to default

Operation after power supply break; Emergency mode

Error codes MO 56;S

MO 43 controller for EST 804

Input terminals MO 43

Description of input terminals and their functions for the MO 43 controller.

Output terminals MO 43

Indication lights on the MO 43

Operating modes MO43 (DIP switches)

Learn mode MO 43

Learning the running time

Procedure for learning the gate's opening and closing running times.

Setup for the partial opening module

Configuring the partial opening feature for pedestrian access.

Operation after power supply break

Setting personal code in the K Type radio remote control

General Notes to Safety