To Next PageTo Next Page
Need help?Do you have a question about the Elka EST 4004K and is the answer not in the manual?
Details safety features of the MO 44-2 control box, including photo-cell reactions and safety contact strips.
Details programmable actions like partial opening, automatic closure, and dead man's button functionality.
Details how to disengage and re-engage the gate opener's gears using the provided tool.
Presents a detailed wiring diagram for the MO 44-2 controller and associated components.
Details various terminal connections, signals, and their functions for the controller.
Describes the meaning of different gate status indicators and their corresponding states.
Explains the function of control buttons like BA1, BA2, BZ, BT, and BTG for gate operation.
Configures motor power output (100%, 80%, 70%, 60%) via DIP A1 and A2 settings.
Sets photo-cell reaction (stop/reverse, stop/open, no effect) using DIP A3 and A4.
Configures automatic closure for partial and complete opening via DIP A5 and A6.
Sets warning light activation before opening/closing using DIP B1 and B2.
Configures locking relays, delayed closing, and three-phase operation via DIP B3, B4, B5.
Enables/disables automatic photo-cell testing before gate movement using DIP B6.
Procedure to learn gate running time and set reserve using LERN and BT buttons.
Procedure to set the gate position for pedestrian opening using LERN and BTG buttons.
Procedures to set time delays before automatic closure from open positions.
Procedures to teach the controller remote control codes for BT, BTG, and BA1 transmitters.
Instructions for combining garage door openers with gate openers using specific MO boards.
Details safety features of the MO 44-2 control box, including photo-cell reactions and safety contact strips.
Details programmable actions like partial opening, automatic closure, and dead man's button functionality.
Details how to disengage and re-engage the gate opener's gears using the provided tool.
Presents a detailed wiring diagram for the MO 44-2 controller and associated components.
Details various terminal connections, signals, and their functions for the controller.
Describes the meaning of different gate status indicators and their corresponding states.
Explains the function of control buttons like BA1, BA2, BZ, BT, and BTG for gate operation.
Configures motor power output (100%, 80%, 70%, 60%) via DIP A1 and A2 settings.
Sets photo-cell reaction (stop/reverse, stop/open, no effect) using DIP A3 and A4.
Configures automatic closure for partial and complete opening via DIP A5 and A6.
Sets warning light activation before opening/closing using DIP B1 and B2.
Configures locking relays, delayed closing, and three-phase operation via DIP B3, B4, B5.
Enables/disables automatic photo-cell testing before gate movement using DIP B6.
Procedure to learn gate running time and set reserve using LERN and BT buttons.
Procedure to set the gate position for pedestrian opening using LERN and BTG buttons.
Procedures to set time delays before automatic closure from open positions.
Procedures to teach the controller remote control codes for BT, BTG, and BA1 transmitters.
Instructions for combining garage door openers with gate openers using specific MO boards.
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Protection Class | IP44 |
| Radio Frequency | 433.92 MHz |
| Maximum Gate Weight | 400 kg |
| Maximum Gate Width | 4 m |
| Power Supply | 230V AC |
| Safety Features | Obstacle detection |
