What to do if Ellies Battery Charger shows Output Overload?
If the Ellies Battery Charger indicates an output overload, reduce the number of AC loads. You can also try restarting the device, or change the CFA setting interface to ON.
What to do if Ellies Battery Charger has Output Short Circuit?
If the Ellies Battery Charger experiences an output short circuit, carefully check the load connections and clear the fault. Then, restart the device, or change the CFA of setting interface to ON.
How to fix Battery Over Discharge on Ellies Battery Charger?
To address a battery over discharge issue on the Ellies Battery Charger, wait until the battery voltage reaches or exceeds the LVR (low voltage reconnect voltage) point. Alternatively, replace the battery.
Provides a general overview of the UPower series inverter/charger, its features, and capabilities.
Details the key characteristics and features of the inverter/charger, often referencing diagrams.
Illustrates the wiring diagram and connection points for the inverter/charger system.
Outlines essential safety precautions and general guidelines before installing the inverter/charger.
Specifies recommended wire sizes and circuit breaker ratings for PV, utility, and battery connections.
Provides instructions and guidelines for physically mounting the inverter/charger unit.
Explains the meaning of various indicator lights on the inverter/charger for system status.
Details the functions of the control buttons and their operational sequences for system control.
Describes the information displayed on the LCD screen and the meaning of various icons.
Guides users through accessing and configuring various settings via the interface, including common and advanced modes.
Covers additional functions like output voltage/frequency selection and remote interface operations.
Lists and explains the various protection mechanisms built into the inverter/charger for safety.
Details fault codes, blinking patterns, and indicators for diagnosing system issues.
Provides solutions and steps to resolve common faults and operational problems.
Outlines routine inspections and maintenance procedures for optimal performance and longevity.
Lists detailed technical parameters, ratings, and specifications for the inverter/charger.
General| Model | FBIC3000VA/48V |
|---|---|
| Output Voltage | 48VDC |
| Output Current | 62.5A |
| Capacity | 3000VA |
| Cooling | Fan Cooling |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Input Voltage | 220VAC |
| Protection | Over Voltage, Over Current, Short Circuit |
| Humidity | 5% to 95% (non-condensing) |
| Efficiency | ≥85% |
To Next Page
