13
As a general rule, Prestige Select will cut anything that scissors will cut.
However, the machine bearings will last longer if the machine is not overloaded.
The number of pieces of material that it will cut depends on the thickness of the
material to be cut and the size and intricacy of the die design. Use only one
sheet of material when cutting with SureCut Crease Rule Dies.
A backing paper should be placed on felt or delicate materials to aid
in cutting. Backing paper will be closest to Cutting Pad when inserted in
machine.
It may be necessary to use fewer sheets of material with a few very
intricate shapes (e.g., Snowflake or Spider).
Use only one sheet of material when cutting with a SureCut CreaseRule Die.
Number of
Pieces * Product
1 Aluminum .016"
1 Balsa Wood 3/32"
1 Basswood
1 Brass .005"
1 Bubble Wrap
8 Butcher Paper
6 Cardstock/Cover Stock
4-5 Cardstock, Laminated
1-2 Chipboard
6-8 Construction Paper
4-6 Construction Paper, Laminated
8 Copier Paper
1 Cork, Self-Adhesive 1/8"
5 Decorator Foil
1 Embossing Rubber
Varies Fabric (Cotton, Linen, etc., as many pieces as will fit
with a piece of paper)
1 Fabric, Iron-On
Varies Felt (as many pieces as will fit with a piece of paper)
1 Felt, Self-Adhesive
1 Fun Foam
3 Funky Film
2 Funky Fur
10 Gift Wrap
1 Leather
1 Magnet, Flexible Sheets
1 Magnet, Self-Adhesive
1 Mat Board
Materials Guide
To Next Page
Loading...