BA_Cyclomotion_EN_Vers.09.2019
3.6 Functioning of the Cyclomotion
The speed of the spindle head (fig. 3.7. G) can be set to either
1 or 4 revolutions per minute (rpm). Due to the internal speed
increase the rotating speed of the clip is 4.5 times higher. The
watches are wound up either in both rotational directions or in
only one rotational direction depending on the type of watch
(see figures 3.6.1. and 3.6.2.).
Fig. 3.6.1. Clip for watches that are wound up in either direction
Fig. 3.6.2. Clip for watches that are wound up in one particular
direction only
Sense of rotation left: only left winding
Sense of rotation right: only right winding
To Next Page
Loading...