Elma Elmasonic P User Manual (English)

Questions and Answers:

J
Joseph SmithSep 6, 2025
What to do if Elma Dental equipment is out of service and the LED display is dark?
- J
  Jennifer MartinSep 6, 2025
  If the Elma Dental equipment is out of service and the LED display is dark, there could be several reasons: * The mains cable might not be connected; in this case, plug in the mains cable. * The mains socket may be dead; check the mains socket and fuse. * The mains cable could be damaged or interrupted; replace the mains cable. * There might be an electronic error; return the unit to the supplier or manufacturer.
D
Donna ReynoldsAug 22, 2025
Why is my Elma Ultrasonic Jewelry Cleaner not heating?
- A
  Amy RobinsonAug 23, 2025
  If your Elma Ultrasonic Jewelry Cleaner isn't heating, there are a few potential causes: * The temperature knob might be set to the "0" position. Adjust the temperature knob to switch on the heating. * The unit might be switched off. Press the on/off key to turn it on. * There could be an electronic error. In this case, return the unit to the supplier or manufacturer.
T
Travis WeissSep 3, 2025
What to do if the mains cable of my Elma Ultrasonic Jewelry Cleaner is damaged?
- L
  Lisa ClarkSep 3, 2025
  If the mains cable of your Elma Ultrasonic Jewelry Cleaner is damaged, provide the original replacement mains cable from the supplier or manufacturer.
L
Linda LaraSep 2, 2025
What to do if my Elma Ultrasonic Jewelry Cleaner gives an Error: 2 when heating is not operating?
- M
  Mr. Jeffrey Ramsey Jr.Sep 2, 2025
  If your Elma Ultrasonic Jewelry Cleaner displays 'Error: 2' and the heating is not operating, it could be due to an electronic error. Switch the unit off and on again; if the error occurs again, return the unit to the supplier or manufacturer.
J
Jimmy MooreSep 1, 2025
What to do if my Elma Ultrasonic Jewelry Cleaner gives an Error: 4?
- D
  danielgravesSep 1, 2025
  If your Elma Ultrasonic Jewelry Cleaner displays 'Error: 4', it indicates an electronic error. Switch the unit off and on again. If the error persists, return the unit to the supplier or manufacturer.
J
John PalmerAug 31, 2025
Why does my Elma Ultrasonic Jewelry Cleaner make boiling noises during heating?
- R
  Richard ThompsonAug 31, 2025
  If your Elma Ultrasonic Jewelry Cleaner is making boiling noises during heating, it's likely due to no stirring of the cleaning liquid. Switch on ultrasound to stir the liquid.
R
Regina PrattAug 29, 2025
What to do if the set temperature is exceeded in my Elma Ultrasonic Jewelry Cleaner?
- A
  Anthony SimonAug 30, 2025
  If the set temperature is exceeded in your Elma Ultrasonic Jewelry Cleaner, it could be due to: * The temperature sensor not measuring the average temperature because there's no stirring. Stir the liquid by hand or by ultrasound. * The set temperature being too low. For low set temperatures, do not switch on heating. * Ultrasonic energy heating up the cleaning liquid. Switch on ultrasound for a short period.
K
kylemartinAug 28, 2025
What to do if my Elma Ultrasonic Jewelry Cleaner gives an Error: 1?
- A
  Allison StephensAug 29, 2025
  If your Elma Ultrasonic Jewelry Cleaner displays 'Error: 1', it indicates that the mains voltage is too low. Check the mains voltage to ensure it is within the correct range.
J
jenningsvalerieAug 27, 2025
Why is my Elma Ultrasonic Jewelry Cleaner not operating ultrasound and the LED display is dark?
- E
  Elizabeth SilvaAug 27, 2025
  If the ultrasound on your Elma Ultrasonic Jewelry Cleaner isn't working and the LED display is dark, consider these possibilities: * The unit might be switched off. Turn it on using the on/off key. * The ultrasound key might not have been pressed. Press the ultrasound key to activate it.
K
Karen WellsAug 27, 2025
What to do if my Elma Ultrasonic Jewelry Cleaner unit is out of service and the LED display is dark?
- D
  Derrick FernandezAug 27, 2025
  If your Elma Ultrasonic Jewelry Cleaner's LED display is dark and the unit is out of service, there could be several reasons: * The mains cable might not be connected. Ensure it is properly plugged in. * The mains socket might be dead. Check the socket and fuse. * The mains cable could be damaged. Replace it if necessary. * There may be an electronic error. In this case, return the unit to the supplier or manufacturer.

Elma Elmasonic P Specifications

General

Brand	Elma
Model	Elmasonic P
Category	Dental equipment
Language	English

Summary

General Information

Important Safety Warnings

Key safety guidelines and warnings for operating the ultrasonic cleaning unit.

Manual Usage Instructions

Guidance on how to read and understand the operating instructions and safety symbols.

Ultrasonic Cleaning Explained

How Ultrasound Cleans

Explains the four key factors influencing ultrasonic cleaning results: energy, media, temperature, and time.

Ultrasonic Cleaning Process Steps

Step-by-step guide on how to perform the ultrasonic cleaning procedure.

Product Description and Features

Key Product Features

Details the key features and specifications of the ultrasonic cleaning unit.

CE Conformity and Delivered Equipment

Unit compliance with CE marking and list of items included in the package.

Description of Unit Front Features

Identifies and describes the main controls and indicators on the front of the unit.

Description of Unit Rear Features

Identifies the ports and connections located on the rear of the unit.

Turning Knob for Draining

Explains the function and operation of the drain knob for emptying the tank.

Description of Operating Elements

Details each button, knob, and LED on the unit's control panel and their functions.

Description of Display

Explains the meaning of the different indicators and values shown on the unit's display.

Operating and Display Functions Overview

Summarizes common intended actions, what to do, and the resulting display.

Initial Operation and Setup

Unit Setup and Placement

Instructions for unit placement, ambient conditions, and drain duct preparation.

Connecting the Unit to the Mains

Steps for safely connecting the ultrasonic cleaning unit to the electrical power supply.

Putting into Operation

Filling the Unit

Instructions for correctly shutting the drain duct and filling the tank with cleaning liquid.

Heating the Cleaning Liquid

Details on how to heat the cleaning liquid and important safety notes regarding temperature.

Automatic Stirring During Heating

Explains the stirring mode that mixes the liquid during the heating-up process.

Degassing the Cleaning Liquid

Describes how to remove air bubbles from cleaning liquids for improved ultrasonic effect.

Ultrasonic Cleaning Process

Operational Safety Precautions

Important warnings about hot surfaces, liquids, and noise emission during ultrasonic cleaning.

Starting the Cleaning Process Manually

Step-by-step guide to initiate an ultrasonic cleaning cycle using manual controls.

Temperature-Controlled Cleaning Start

Procedure for starting cleaning automatically once the set temperature is reached.

Degas Mode Operation

Details on activating and using the Degas mode for efficient degassing of liquids.

Sweep Mode Operation

Explanation of the Sweep mode for achieving a more homogeneous sound field distribution.

Pulse Mode Operation

How to activate the Pulse mode to intensify ultrasonic cleaning effect.

Setting Cleaning Parameters

Instructions on selecting frequency, power, and time for optimal cleaning results.

Item Placement and Post-Cleaning

Guidelines for placing items, rinsing, and draining the unit after cleaning.

Cleaning Media Guidelines

Solvent and Aqueous Cleaner Limits

Critical warnings and restrictions for using solvents and aqueous cleaners in the ultrasonic bath.

Dental Cleaning Media

Lists Elma cleaning concentrates for dental applications.

Medical Cleaning Media

Lists Elma cleaning concentrates for medical applications.

Optics Cleaning Media

Lists Elma cleaning concentrates for optical lenses and components.

Laboratory Cleaning Media

Lists Elma cleaning concentrates for laboratory use and sensitive materials.

Maintenance and Care

Routine Maintenance and Care

Instructions for safe maintenance, electrical checks, and cleaning of unit components.

Transducer Tank Service Life

Tips and recommendations to prolong the service life of the transducer tank.

Repair and Liability

Information on authorized personnel for repair and maintenance, and liability.

Technical Details

Unit Specifications and Performance

Table detailing tank capacity, dimensions, weight, voltage, frequency, and power for various models.

Troubleshooting Guide

Common Problems and Solutions

Lists common issues like unit errors, heating problems, and insufficient cleaning with causes and solutions.

End of Life and Disposal

Manufacturer Contact Information

Provides contact details for the manufacturer and suppliers for further assistance.

Related product manuals

Elma 104 6386

36 pages

Elma Elmasonic P User Manual

Table of Contents